Parade DIS for the California BAR

If the car has a traditional distributor:

• use a Trigger lead on #1 plug wire

http://www.aeswave.com/Trigger-Pickup-Inductive-Lead-p9183.html

• with a Secondary Lead on coil wire.

http://www.aeswave.com/Universal-Secondary-Test-Lead-Kit-for-COP-DIS-HEI-Dist-p9174.html

If there is no Plug Wire then clip the Secondary Lead to centralized location on cap.

Otherwise, get a Mixmaster?

Mixmaster kit with 4 pickup leads (AES# pt-PP361)

Overview: http://www.aeswave.com/Mixmaster-12-channel-ignition-signal-mixer-p8751.html

Mixmaster kit with 4 pickup leads (AES# pt-PP361)

Overview: http://www.aeswave.com/Mixmaster-12-channel-ignition-signal-mixer-p8751.html

To connect the Mixmaster to scopes with BNC you will need three BNC/Banana adapters:

Flexible Adapter -- Stacking B-Plugs to Female BNC (AES# 08-86-F)

Overview: http://www.aeswave.com/Flexible-Adapter-Banana-Plugs-to-BNC-Female-p8514.html